Full WRAS approval.
Manufactured to meet BS7491 Parts 1 & 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.
Delivery generally 2 weeks.
Grey colour as standard (other RAL or BS colours are available at additional cost)
Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.
All internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.
After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.
Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell – a one piece tank in two or more bolt together sections.
All of the components including sealant and fixings for the joint flange are supplied with the tank.
The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.
Nominal capacity shown
Nominal capacity= full capacity to top of tank
Actual capacity =float level
To download product information click on the PDF icons below.
|
| Name |
Description |
Download PDF |
| Fittings |
Instructions |
 |
| Template |
Options |
|
